Linux Hardware Review

Epson Perfection V37/V370 is not detected properly by hw-probe

Started by f451, Jan 14, 2022, 01:20 AM

0 Members and 2 Guests are viewing this topic.

Previous topic - Next topic
Go Down
Jan 14, 2022, 01:20 AM
Hi,

hw-probe fails to detect Epson Perfection V37/V370
on linux mint 20.3 cinnamon, where it *is* actually working. It works with Epson's own linux driver.
Probe URL: https://linux-hardware.org/?probe=ae9f25c32f
#1 Jan 14, 2022, 11:55 AM
Yeah, both hwinfo and lsusb have failed to detect the driver. Probably we can get some info from `lpstat`. Could you please show output of `lpstat -t` and `lpstat -p <YOUR_PRINTER_ID> -l`?
#2 Jan 14, 2022, 03:36 PM
QuoteYeah, both hwinfo and lsusb have failed to detect the driver. Probably we can get some info from `lpstat`. Could you please show output of `lpstat -t` and `lpstat -p <YOUR_PRINTER_ID> -l`?

Code Select
root@redacted:~# lpstat
root@redacted:~#

Code Select
# lpstat -t
scheduler is running
system default destination: Lexmark-E120n
device for Lexmark-E120n: socket://192.168.1.201:9100
Lexmark-E120n accepting requests since Thu 13 Jan 2022 00:09:11 GMT
printer Lexmark-E120n is idle.  enabled since Thu 13 Jan 2022 00:09:11 GMT
root@redacted:~#
Code Select
root@redacted:~# lpstat -p Lexmark-E120n -l
printer Lexmark-E120n is idle.  enabled since Thu 13 Jan 2022 00:09:11 GMT
root@redacted:~#



#3 Jan 14, 2022, 05:15 PM
Quote from: linuxhw on Jan 14, 2022, 11:55 AMYeah, both hwinfo and lsusb have failed to detect the driver. Probably we can get some info from `lpstat`. Could you please show output of `lpstat -t` and `lpstat -p <YOUR_PRINTER_ID> -l`?

not sure why you're asking about the printer though. The Epson Perfection V37/V370 is a flatbed scanner
#4 Jan 15, 2022, 01:26 AM
Sorry, I mistakenly thought it has printer capabilities. Please post output of `scanimage -L` as well. Probably we can automatically change the status of the device to 'works' in the probe if it's listed in the output of scanimage.
#5 Jan 15, 2022, 01:29 AM
QuoteSorry, I mistakenly thought it has printer capabilities. Please post output of `scanimage -L` as well. Probably we can automatically change the status of the device to 'works' in the probe if it's listed in the output of scanimage.

$ scanimage -L
device `epsonscan2:EPSON Perfection V37/V370:006:002:esci2:usb:ES00DD:330' is a EPSON EPSON Perfection V37/V370:006:002 flatbed scanner
Go Up